Pb enregistrement télécommande Raymarine s100

Extrait de la doc (l'aviez vous ? )
"===========================================================================
Handset Registration
Raymarine wireless systems demand that each wireless controller is
“registered” to a basestation. This registration process is to prevent
unauthorized control of your boat by another user nearby. Your S100 system
is supplied with the handset pre-registered to the basestation.
There may be instances where you want to move your controller to another
boat and use it with another system. In this case, you will need to de-register
from the current system and register with the new system. You can do this
using the REGISTRATION function.
User Guide
27
81242_1.fm Page 28 Monday, January 10, 2005 4:01 PM
To Register a handset
In the DEALER menu, at
REGISTRATION, press PILOT.
If the S100 is not registered, the
display will read NOT REGISTERED.
Press > to start the registration
process, you can press < at any time
to stop the search.
NOT REGISTERED
REG >
REGISTER
START >
SEARCHING
< CANCEL
When the basestation is found by the
SmartController and registration is
complete, the display will read REGISTERED
D7657-1
For successful registration, ensure that all other handheld units on your
boat are turned off. If you try to register a new handset with others active,
you will see a REGISTRATION INCOMPLETE message.
To de-register a handset.
REGISTERED
In the DEALER menu, at
DE-REG >
REGISTRATION, press PILOTIf the
D7674-1
S100 is already registered, then the
display will read REGISTERED. Press > to continue, or STANDBY to cancel
the operation.
The S100 will attempt to communicate with the basesation and de-register.
When complete, the display will read NOT REGISTERED.
If the S100 cannot communicate with the basestation, a BASE NOT FOUND
message will be displayed. It is still possible to de-register the S100 at this
point by pressing >. To leave without de-registering, press STANDBY.
Factory Reset
This option will clear all settings from the S100. Press and hold the PILOT
key for 2 seconds to activate the reset.
Note: A reset does not alter the registration status of the S100
28

Merci les amis, évidemment la base est de même génération, il est vrai que le chéquier est plus simple.

J'ai lu la doc, c'est bien là qu'est le pb : pas de fonction registration dans le dealer menu pour cette version logicielle.